Beris

Our new single- and double-jointed plastic mouthpiece is particularly slim in its dimensions - broad contact areas and a low height ensure more comfort even in smaller horse mouths. The surface of the plastic is very smooth and slides well in the mouth, even with horses that produce little saliva. The mouthpiece lies on the tongue and lips with its broad contact surface and, with its smooth profile, subtly merges into a rotated fitted eggbutt. The joints and middle piece are finely worked, and installed in such a way as to match the low height of the mouthpiece. We guarantee the bit rings sliding smoothly due to the incorporated copper sockets.Precision rein management and subtle communication close to the ideal with the new single- and double-jointed bit from beris!

Our new single- and double-jointed plastic mouthpiece is particularly slim in its dimensions - broad contact areas and a low height ensure more comfort even in smaller horse mouths. The surface of the plastic is very smooth and slides well in the mouth, even with horses that produce little saliva in the mouth. The mouthpiece lying on the tongue and lips with its broad contact surface, transitions subtly, merging into a rotated fitted eggbutt. The joints and middle piece are finely worked, and installed in such a way as to match the low height of the mouthpiece. We guarantee the bit rings sliding smoothly due to the incorporated copper sockets.Precision rein management and subtle communication close to the ideal with the new single- and double-jointed bit from beris!

This ported bar has an especially flattened port design. This gives the tongue optimum room. Many horses respond to this with more relaxation and increased chewing. This bit is also well suited to horses that play with their tongues, trying to put their tongue over the bit, as the port prevents this effectively. Therefore, this bit is eminently suited to horses that don’t like conventionally shaped bits due to the pressure on the tongue and respond with head-shaking and the like. The shaped transition from the mouthpiece to the bit rings makes pinching of the lips impossible and also provides the bit with a particularly stable lateral hold.The shape of the bit is well suited to working with young horses.

The eggbutt bar is a universally used mouthpiece. It sits very quietly in the horse"s mouth and the "olives" at each side effectively prevent pinching of the lips. Increased pressure from the second rein on the gag causes the bit to rotate and lifts the bit in the mouth, which results in a stronger effect. Very useful on horses that tend to lean on the bit. Can also be used to produce more elevation in the horse.

beris PRIME sets new standards in communication between horse and rider. Due to the anatomical shape of the extremely soft mouthpiece, the pressure is equally distributed on tongue and bars. The integrated oval bit guards with the carefully shaped transition to the middle part prevent lip pinching and also provide lateral support. The increased pressure from using the second rein on the gag bit causes the bit to rotate and be pulled upwards in the mouth. This results in a stronger effect. Very useful with horses that tend to lean on the bit. Likewise also useful on horses for achieving increased elevation.

The tongue port bar has an especially flattened shape to the port. This gives the tongue optimum room. Many horses respond to this with improved suppleness and increased chewing. This bit is also very well suited to horses that play with their tongues, trying to get their tongue over the bit, as the port effectively prevents this. This mouthpiece is thus eminently suited to horses that do not tolerate traditionally shaped bits due to the pressure on the tongue and react by head-shaking or similar. This bit ensures optimum pressure distribution on lower jaw and mouth, and is very well accepted by horses. The second rein acts like a chin strap, which can be taken up and released. This bit is very good for particularly strong and forward-going horses.

This combines the effect of a tongue port with the positive characteristics of the butterfly bar. The profile of the KONNEX bar is slimmer, it positions itself very comfortably in the horse’s mouth, providing more room. In addition, the port is significantly broader in the KONNEX bar. Suitable for horses with little room in their mouth, e.g. thoroughbred types or older horses (due to change in dental alignment), horses with larger tongues and especially those not tolerating pressure points on the tongue.

Identical in shape to the Comfort Bar, just the thickness is a lot thinner at 15 mm. This makes the bit an ideal one for ponies and horses with limited room in their mouths. Very successful in use as a dressage bit on horses for whose mouth a thick Weymouth bit and bradoon would be too much.

This anatomically correct bit sits lightly and evenly on tongue and bars and provides more room and freedom of movement for the tongue. When the reins are taken up, pressure is applied evenly on tongue and bars. A lateral squeezing of tongue and bars will not take place. Bit guards prevent pinching of the lips. Thanks to its slightly curved shape, the comfort bar sits very still in the horse"s mouth. Bits with a slightly curved bar are considered to be particularly gentle and kind to the mouth. This property, in combination with our beris plastic, enables the horse and rider to communicate with each other in an easier and more gentle way. The comfort bar is especially suitable for young and sensitive horses. The loose ring means that the bit is more mobile in the mouth. The loose ring snaffle is meant for horses who prefer this extra ´mobility´ in a bit. The ring runs very smoothly in the copper sockets, the resulting better durability leads to an increased lifespan for the bit.

Horses accept leather bits exceptionally well. Leather is a purely natural product, it promotes chewing and also the flow of saliva. The bit slides easily in the mouth thereby increasing well being. The processed leather has been vegetable-tanned and hand stitched. When moistened, the anatomically pre-shaped bit adjusts perfectly to the anatomy of the horse"s mouth. Our leather mouthpiece is particularly well suited to young and highly sensitive horses. Even horses that generally dislike bits in their mouth mostly like a leather bit and can re-learn a trusting acceptance of the bit. The loose ring means that the bit moves more in the mouth. The loose ring snaffle is therefore a bit for horses who prefer a more mobile bit. The ring runs very smoothly in the copper sockets, and the resulting better durability increases the life of the bit. In choosing the bit, one can also address the horse"s requirements.

The tongue port bar has a specially flattened shape to the port. This means the tongue has an optimum amount of room. Many horses respond to this with improved suppleness and increased chewing. This bit is also very well suited to horses that play with their tongues, trying to put the tongue over the bit, as the port effectively prevents this. Therefore this bit is eminently suitable for horses that do not tolerate conventionally shaped bits due to the pressure on the tongue and react with head-tossing and the like. The loose ring means a greater mobility of the bit in the mouth. This snaffle bit is therefore a bit for horses that prefer a "more mobile" bit in their mouth. The ring runs very evenly in the copper sockets and, due to the better durability, increases the working life of the bit considerably.

Our new single- and double-jointed plastic mouthpiece is particularly slim in its dimensions - broad contact areas and a low height ensure more comfort even in smaller horse mouths. The surface of the plastic is very smooth and slides well in the mouth, even with horses that produce little saliva. The mouthpiece lies on the tongue and lips with its broad contact surface and, with its smooth profile, subtly merges into a rotated, fitted, olive shape. The joints and middle piece are finely worked, and assembled so as to match the low height of the mouthpiece. We guarantee that the bit rings slide smoothly as a result of the incorporated copper sockets.Precision rein management and subtle communication close to the ideal with the new single and double-jointed bit from beris!

beris PRIME sets new standards in communication between horse and rider. Due to the anatomically correct shape of the extremely soft mouthpiece, the pressure is evenly distributed on the tongue and bars. The integrated oval bit guards with their carefully shaped transitions to the middle part prevent lip pinching and also provide particularly good lateral support. The Pelham- a classic bit, now in our more elegant and enhanced design. When the reins are applied, the bit acts on the mouth, lower jaw and poll. Depending on lever length of the shanks (5 cm or 7.5 cm), a different strength and direct bit angulation in the mouth is achievable. Used on horses that have difficulties coming through at the poll, "hot" horses, or on horses that need significant input in critical situations (such as jump offs or similar). The Pelham is supplied with curb hooks.

Our new single - and double -jointed plastic mouthpiece is particularly slim in its dimensions - broad contact areas and a low height ensure more comfort even in smaller horse mouths. The surface of the plastic is very smooth and slides well in the mouth, even with horses that produce little saliva. The mouthpiece lies on the tongue and lips with its broad contact surface and, with its smooth profile, subtly merges into a rotated, fitted, olive shape. The joints and middle piece are finely worked, and assembled so as to match the low height of the mouthpiece. We guarantee that the bit rings slide smoothly as a result of the incorporated copper sockets.Precision rein management and subtle communication close to the ideal with the new single- and double-jointed bits from beris!

Form and function meet design!Our new single and double-jointed plastic mouthpiece is particularly slim in its dimensions - a broad contact surface and low height ensure more comfort in smaller horse mouths.The surface of the plastic is very smooth and slides well in the mouth, even when horses produce little saliva.The mouthpiece lies on the tongue and lips with its broad contact surface and subtly transitions into a smoothly modelled and rotated, fitted olive shape. Pinching of the lips is impossible!The joint and also the central piece is processed very finely and then adapted to the minimal height of the mouthpiece when fitted. The copper sockets fitted into the side olives enable an almost resistance-free, smooth sliding of the bit rings.Single or jointed, both mouthpieces are finely manufactured with the highest degree of skill and are impressive with their delicately modelled transitions.Precision rein management and gentle communication verging on the ideal with the new single- and double-jointed beris bits!

The tongue port bar has an especially flattened shape to the port. This gives the tongue optimum room. Many horses respond to this with improved suppleness and increased chewing. This bit is also very well suited to horses that play with their tongues, trying to get their tongue over the bit, as the port effectively prevents this. This mouthpiece is thus eminently suited to horses that do not tolerate traditionally shaped bits due to the pressure on the tongue and react by head-shaking or similar. The Tandem US is almost identical to the regular Tandem. With its understated black noseband, it is favoured for use at sales and demonstration events.

The tongue port bar has an especially flattened shape to the port. This gives the tongue optimum room. Many horses respond to this with improved suppleness and increased chewing. This bit is also very well suited to horses that play with their tongues, trying to get their tongue over the bit, as the port effectively prevents this. This mouthpiece is thus eminently suited to horses that do not tolerate traditionally shaped bits due to the pressure on the tongue and react by head-shaking or similar. The Tandem is to be used with one set of reins. It causes pressure on the horse‘s nose, the branches of the lower jaw and poll. Increasing the pull, a slight lifting effect of the bit is achieved. Suitable for horses that are too sensitive in the mouth for a bit alone, but can’t be ridden with just a Hackamore.

The butterfly bar is an absolute innovation in the field of mouthpieces. The anatomically correct shape combined with a broader surface in the tongue area creates the optimum amount of room for this sensitive muscle with the possibility of a very gentle effect. Horses show they are feeling at ease by increased chewing and more acceptance of the bit. If a stronger effect on the horse‘s mouth is needed, the angulation of the bit in the mouth can be altered with a sidepiece that acts as a lever. The increased pressure on specific points can achieve the communication desired. When the pressure is reduced, the butterfly mouthpiece goes back to the comfortable position.The loose ring means a greater mobility of the bit in the mouth. The snaffle is therefore a bit for horses who prefer a "more mobile" bit in their mouth. The ring runs very evenly in its copper sockets and the better durability increases the lifespan of the bit substantially.

Providing the combined effect of a port and the positive characteristics of the butterfly bar, the profile of the beris KONNEX bar is slimmer and it positions itself very comfortably in the horse’s mouth. There is also more room available as the port in the beris KONNEX bar is significantly wider. Suitable for horses with little space in the mouth e.g. thoroughbred types or older horses (due to change in tooth alignment), horses with large tongues and, in particular, ones sensitive to pressure points on the tongue. The 3 ring bit combines an effective lateral restriction, lever and elevator action in one. The degree of effect is selected by the different buckling possibilities for the reins. Buckled onto the bottom ring, taking up the rein exerts the effect of a short lever. The 3-ring bit is often used to test the horse"s reaction to a lever effect.

Our new single- and double -jointed plastic mouthpiece is particularly slim in its dimensions - broad contact areas and a low height ensure more comfort even in smaller horse mouths. The surface of the plastic is very smooth and slides well in the mouth, even with horses that produce little saliva. The mouthpiece lies on the tongue and lips with its broad contact surface and, with its smooth profile, subtly merges into a rotated, fitted, olive shape. The joints and middle piece are finely worked, and assembled so as to match the low height of the mouthpiece. We guarantee that the bit rings slide smoothly as a result of the incorporated copper sockets.Precision rein management and subtle communication close to ideal with the new single- and double -jointed bit from beris!

The beris PRIME sets new standards in communication between horse and rider. Due to the anatomical shape of the extremely soft mouthpiece the pressure is equally distributed on tongue and bars. The integrated oval bit guards with their carefully designed transition to the middle piece prevent pinching of the horse‘s lips and provide the bit with additional, particularly good lateral support. The shape and the weight of the rings ensures a very quiet, neutral position in the horse"s mouth. This characteristic makes the bit wonderfully suited to young and inexperienced horses. The shape of the sidepiece also provides optimum lateral support and guidance. The large ring facilitates good and quiet use of the reins.

This ported bar has an especially flattened port design. This gives the tongue optimum room. Many horses respond to this with more suppleness and increased chewing. This bit is also well suited to horses that play with their tongues, trying to put their tongue over the bit, as the port prevents this effectively. Therefore this bit is eminently suited to horses that don’t like conventionally shaped bits due to the pressure on the tongue and respond with head-shaking or similar. The 3 ring bit combines an effective lateral restriction, lever and lifting action in one. The degree of effect is selected by the different buckling possibilities for the rein. Buckled onto the bottom ring, taking up the rein exerts the effect of a short lever. The 3-ring bit is often used to test the horse"s reaction to a lever effect.

This anatomically correct bit sits lightly and evenly on tongue and bars and provides more room and freedom of movement for the tongue. When taking up the reins an even pressure is applied to the bars and tongue. The tongue and bars are not squeezed laterally. The use of bit guards prevents lip pinching. Thanks to its slightly curved shape, the comfort bar lies very quietly in the horse"s mouth. Mouthpieces with a slightly curved bar are considered to be particularly gentle and kind on the mouth. This characteristic combined with our beris plastic enables horse and rider to communicate in a gentler and easier way. The Comfort bit is especially suited to for young and sensitive horses. The 3 ring bit combines an effective lateral restriction, lever and elevator action in one. The degree of effect is selected by the different buckling possibilities for the reins. Buckled onto the bottom ring, taking up the rein exerts the effect of a short lever. The 3-ring bit is often used to test the horse"s reaction to a lever effect.